Cold water storage tank relining | Maxline 100 | Maxkote | UK

Flexible Polyurethane tank relining system for potable drinking water tanks

Maxline 100 is a potable drinking water tank relining system for cold water storage tanks.  

The product is a WRAS approved solvent-free polyurethane coating specifically designed to provide long-term corrosion and erosion protection for cold water storage tanks

Once cured the product is extremely flexible and will flex with the tank as it cycles from full to empty without any risk of cracking. 

The material can be applied by brush or roller directly to most prepared surfaces and will bond to:

  • Steel & Galvanised steel cold water stroage tanks
  • Steel and GRP sectional water tanks
  • Above ground concrete potable water tanks
  • Below gound concrete cold water reservoirs

Maxline 100 has a design life in excess of 10 years.

We offer a full application service through our network of approved 3rd party  contractors,  please do not hesitate to contact us for further details.

 

Maxline 100 polyurethane tank relining system
Potable water tank relined with Maxline 100 - WRAS approved Polyurethane Coating System

Tank Relining solving problems for:

Application areas for tank lining AND RELINING:

Range Features

Range Benefits

  • Potable Water Tanks
  • Cold Water Storage Tank
  • Drinking Water Tanks
  • Tank liner
  • Re-line steel, concrete, GRP and galvanised cold water storage tanks 
  • Line potable water pipelines
  • Cooling towers relines
  • Concrete reservoirs
  • Water Tank Reline 
  • 100% solids polyurethane
  • Solvent-free
  • Erosion & corrosion resistance
  • Flexible after cure
  • 2 Colour system
  • High gloss surface finish 
  • No solvent, no shrinkage
  • Safe to use in a confined space
  • Long-term tank protection
  • No cracks due to movement
  • Aid coating application
  • Easily cleaned and helps to reduce bacterial growth
  • Surface Primer required for concrete, GRP and galvanised tanks
  • MaxLine 100 Lining system
  • Ancillaries – Brushes, Rollers etc..
  • Empty and clean the tank
  • Surface preparation with be required for all applications but type of preparation is dependent on the base material of the tank and condition
  • Using Maxline 100, stripe coat all joints and seams
  • Apply the base-coat of Maxline 100 (grey) at a target wet film thickness of 400 micron
  • Apply the top-coat of Maxline 100 (blue) at a target wet film thickness of 400 microns
  • Once cured, inspect the tank for any misses, pinhole or holiday and repair 

Priming will be required for all applications to concrete, brick or block. MaxPrime 100 is a high quality, 100% solids epoxy primer/sealer. Recommend for use on concrete with a moisture content below 8%.

Typically applied in a single coat at a target film thickness of  150 microns 

Priming will be required for all applications to concrete, brick or block. MaxPrime 200 is a high quality 100% solids epoxy primer recommend for on damp concrete with a moisture content below 30%.

Typically applied in a single coat at a target film thickness of  150 microns 

MaxCrete 400 is a single component, polymer modified, fibre-reinforced Portland cement based screed. Which is physically and chemically compatible with the host concrete substrates. Once cured the material can withstand 10bar negative or positive hydrostaic pressure.

Maxline 100 is a WRAS approved solvent-free polyurethane coating system. Specifically designed for re-lining potable and drinking water tanks and provides excellent protection against erosion and corrosion.

Once cured the product is extremely flexible and will breathe with the tank as it cycles from full to empty without any risk of cracking. 

Potable water Tank Lining Products

Pump & Valves
MaxCeram epoxy repair and rebuilding compounds and epoxy ceramic coatings can help to combat the effects or erosion, corrosion, cavitation and chemical attack in pumps and fluid-flow equipment