Industrial Floor Repair & Protection
Our range of Maxflo industrial floor coatings and repair products provide a hard wearing surface that is aesthetically pleasing
Maxflo industrial floor coatings are formulated using the latest 100% solids, solvent-free epoxy and polyurethane resins. When mixed, the products are simple to apply with a brush or roller.
- High gloss epoxy
- High gloss polyurethane
- Anti-static floor coating
- Rapid cure floor coatings
- Self levelling
- Line marking
- Anti-slip systems
- Range of colours
All products are tough and easily cleaned providing a high gloss finish that is resistant to a wide range of chemicals. With the addition of an aggregate, the products are suitable for a variety of anti-slip options.
Solving Problems for Floors:
- Concrete industrial floors
- Steel surfaces
- Chemical attack
- Industrial floor areas
- Steel walkways and checker plate
- Steel decks and ramps
- Concrete ramps
- Chemical process areas
- Line demarcation
- Food prep & production areas
- Areas that require control of static electricity
- 100% solid epoxy & polyurethane
- Resists a wide range of chemicals
- High bond strength
- High flexural strength
- Range of colours
- No solvent, no shrinkage
- Safe to use in a confined space
- variety of applications
- 3.9 MPa (concrete failure)
- Suitable for high load areas
- Colours of your choice
- Surface Primer dependent on system
- Floor coating system
- Ancillaries – brushes, rollers etc.
- Cleaning & surface preparation
- Surface priming if required
- Base coat of floor coating
- Aggregate if anti-slip is required
- Sealer coat of floor coating
Priming will be required for all applications to concrete, brick or block. MaxPrime 100 is a high quality, 100% solids epoxy primer/sealer. Recommend for use on concrete with a moisture content below 8%.
Maxflo 100 Epoxy high gloss floor coating is formulated using the latest 100% solids, solvent-free epoxy resins. When mixed, the product is simple to apply with a brush or roller
After curing MaxFlo 100 has a tough and easily cleaned high gloss finish that is resistant to a wide range of chemicals. With the addition of an aggregate, the product is suitable for a range of anti-slip options
Maxflo 200 – Anti-static epoxy floor coating is formulated using the latest 100% solids, solvent-free epoxy resins. When mixed, the product is simple to apply with a brush or roller.
Suitable for areas of use where the resistance of fewer than 10⁸ ohms are required.
MaxFlo 300 Self-levelling epoxy floor repair system. The material is a solvent-free epoxy high build free self-levelling repair compound.
Designed for application to worn or uneven concrete surfaces, applied thickness typically between 1-4mm
MaxFlo 400 – Decorative floor system is an epoxy-based solvent free floor coating system designed to be used with the addition of coloured quartz aggregates.
Once cured the system gives a bright, light stable, slip-resistant finish that is hard wearing