Previous
M-CERAMIC 500 - Epoxy Ceramic High Temperature Coating

M-CERAMIC 500 – Epoxy Ceramic High Temperature Coating

£120.60£303.40 Excl VAT
Next

M-CERAMIC 403 – Epoxy Ceramic Wear Compound – High Abrasion & High Temperature

£460.20 Excl VAT
M-CERAMIC 403 - Epoxy Ceramic Wear Compound - High Abrasion & High Temperature
M-CERAMIC 600 - Epoxy Ceramic Underwater Coating

M-CERAMIC 600 - Epoxy Ceramic Underwater Coating

£291.70 Excl VAT

M-CERAMIC 600 – Epoxy Ceramic Underwater Coating

£291.70 Excl VAT

Is a flexible high build solvent-free epoxy coating designed for application to wet or underwater structure such as Jetties & Piers & Oil Rigs.

 

SKU: CER600/4LTR/G Categories: ,

Description

M-CERAMIC 600 – Epoxy Ceramic Underwater Coating

Is a flexible high build solvent-free epoxy coating designed for application to wet or underwater surfaces.

The ceramic enhanced product provides long term protection for steel and concrete structures against corrosion, abrasion and chemical attack.

The product cures at 5°C and is applied in a single coat at 750 microns to 1mm thickness.

Typical Uses

  • Subsea Structures
  • Buried and Submerged Pipelines
  • Protect Risers Legs
  • Oil Rig Splash Zones
  • Corrosion Barrier for Piers and Jetties

Application Guide

  • The surface to be coated must be free of any marine life such algae or barnacles, any degraded coating or surface corrosion must be cleaned from the surface.
  • For the best results the underwater repair surface can be hydro-blasted at a minimum pressure of 3000psi. This method of preparation will ensure the majority of surface contaminants will be cleaned from the surface.
  • If it is not possible to hydro-blast the surface then handheld scrapers and chisels can be used to clean the surface. If possible a rough pad should be used to try and take away any loose coating or surface corrosion.
  • Please be aware that this type of surface preparation will reduce the performance of the coating.

Prior to mixing please ensure the following:

  • The base component is at a temperature between 15-25°C.
  • Do not apply the material when the ambient or substrate temperature is below 5°C.
  • Transfer the contents of the Activator unit into the Base container.
  • Using the spatula provided, mix the 2 components until a uniform material free of any streaks is achieved.

Use all mixed material within 45 minutes at 20°C.

  • The material has been designed to be applied to underwater surfaces in a single coat at 750 microns to 1mm wet film thickness.
  • Using the applicator tool provided the material should be pressed onto the surface.
  • Ensure you do not over work the coating once applied onto the underwater surface, as a general rule if the coating has covered the repair area then leave it to cure.
  • You can dress or smooth off the coating after a minimum of 4 hours after application using a gloved hand.
AppearanceBase
Activator
Mixed
Grey liquid
Amber liquid
Grey liquid
Mixing RatioBy Weight
By Volume
6.75:1
4:1
DensityBase
Activator
Mixed
1.67
0.99
1.54
Volume Capacity649cc/1kg
Solids Content100%
Sag ResistanceNil at1000 microns
Usable Life10°C
20°C
30°C

90 minutes
45 minutes
22.5 minutes
Coverage1kg at a nominal thickness of1.333m² at 750 microns
1m² at 1000 microns
Cure Times @ 20°CMinimum overcoating time
Maximum overcoating time
Full Cure
6 hours
12 hours
3 days
Storage LifeUnopened and stored in dry conditions (15-30°C)5 years
Abrasion ResistanceTaber H10 Wheels/1 Kg load38mm³ loss/1000 cycles
Adhesion
Tensile Shear
Tested to ASTM D1002 on blasted mild steel with 75 micron profile
Tested to ASTM D1002 on blasted mild steel with 75 micron profile (wet)
184kg/ cm² (2610psi)
176kg/ cm² (2500psi)
Corrosion ResistanceTested to ASTM B1175000 hours
Flexural StrengthTested to ASTM D790614kg/cm² (8710psi)
Impact ResistanceTested to ASTM D25632J/m
HardnessShore D to ASTM D224020°C 80

Additional information

Weight 0.125 kg
Unit Size

4ltr

Colour

Dark Grey

Pot Life @ 20°C

20/ 25 Mins

Mixing Ratio

4:1 By Volume, 6.75:1 By Weight

Material

Epoxy

Number of Coats

1

Manufacturer

Maxkote

Shopping cart

1

Subtotal: £317.70

View basketCheckout